The AD-2 Acoustic Preamp is built around Boss's Acoustic Resonance processing, which reads your acoustic-electric signal as you play and rebuilds the body and top resonance that an undersaddle piezo can't reproduce on its own. One knob runs it, with several linked parameters moving behind it, and a second knob does the same for Ambience, a reverb Boss voiced specifically for acoustic guitar.
The stage tools are what earn it a spot on the floor. A Notch knob deals with low-frequency feedback: turn it until the rumble goes. The Output jack feeds an acoustic amp or monitor while a balanced TRS Line Out goes straight to the PA, and you can keep Ambience off that feed so the front-of-house engineer adds their own. A mute function covers tuning and guitar changes.
For four-band EQ, two channels, a looper and stored setups, step up to the AD-10 Acoustic Preamp.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch; ACOUSTIC RESONANCE knob; AMBIENCE knob; NOTCH knob
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
LINE OUT jack: 1/4-inch TRS phone type
DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 10 M ohms
Nominal Output Level: OUTPUT jack: -20 dBu; LINE OUT jack: -20 dBu
Output Impedance: OUTPUT jack: 1 k ohm; LINE OUT jack: 600 ohms
Recommended Load Impedance: OUTPUT jack: 10 k ohms or greater; LINE OUT jack: 600 ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Alkaline battery (9V, 6LR61); AC adaptor (sold separately)
Current Draw: 65 mA
Expected battery life under continuous use: Alkaline: Approx. 5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 420 g / 15 oz



