The DS-1 Distortion arrived in 1978 as Boss's first distortion pedal, and the design is unchanged. Its two-stage circuit pairs a transistor gain stage with an op-amp gain stage, which Boss credits for its full low end.
The Dist knob runs from a light boost for pushing an amp to heavy rock gain. The Tone control works in both directions: clockwise adds highs and trims lows, counter-clockwise does the reverse, so it covers tight rhythm tones and fatter lead sounds. Boss says rolling back your guitar volume cleans it up without muddiness.
The DS-1W Waza Craft keeps a Standard mode for this sound and adds a Custom mode with a fatter voice. The DS-1X uses Boss's MDP technology and DSP for distortion that adapts to what you play.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch, TONE knob, LEVEL knob, DIST knob
Indicator: CHECK indicator (Used for indication of check battery)
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
POWER
Power Supply: Alkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22), AC adaptor (PSA series: sold separately)
Current Draw: 10 mA
Expected battery life under continuous use: Carbon: Approx. 50 hours, Alkaline: Approx. 80 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 360 g / 13 oz



