The DS-2 Turbo Distortion arrived in 1987 as the follow-up to the DS-1, and its defining feature is the Turbo selector: two distortion voices from one discrete analog circuit. Turbo I is midrange-focused with a fuller low end, and runs from gritty drive at low settings up to tight, thick distortion. Turbo II adds a resonant mid boost for a more pronounced high-gain voice that suits leads.
The Tone knob is active and works on both highs and lows, and Boss keeps the noise low even with the gain up. The Remote jack lets an optional external footswitch change Turbo modes, so you can run Turbo I for rhythm and step into Turbo II for a solo without reaching down to the pedal.
The DS-1 Distortion is the single-voice original it grew from.
SPECIFICATIONS
CONTROLS
Controls: TURBO selector knob; DIST knob; TONE knob; LEVEL knob; Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
REMOTE jack: 1/4-inch phone type
DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61); AC adaptor (PSA series: sold separately)
Current Draw: 15 mA
Expected battery life under continuous use: Carbon: Approx. 25.5 hours; Alkaline: Approx. 42 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 395 g / 14 oz



