The ODB-3 Bass OverDrive is a compact overdrive designed for bass. The Balance knob mixes the clean bass signal with the overdriven one, so you can keep as much of your clean low end under the drive as you want. Separate High and Low EQ knobs shape the tone, and Gain and Level set the drive and output.
Boss aims it at hard rock, thrash and punk players. It runs on a 9V battery or a PSA adaptor and draws 20 mA.
For a blend control plus a balanced Line Out straight to a PA or recorder, look at the BB-1X Bass Driver.
SPECIFICATIONS
CONTROLS
Controls: GAIN knob, BALANCE knob, EQ HIGH/LOW knob, LEVEL knob, Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 20 mA
Expected battery life under continuous use: Carbon: Approx. 24.5 hours, Alkaline: Approx. 40.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 390 g / 14 oz



