The SY-1 Synthesizer brings Boss polyphonic guitar synth technology, first developed for the SY-300, into a compact that works with any guitar or bass over a standard cable, with no special pickup. It holds 121 sounds, 11 types with 11 variations, covering leads, pads, strings, organs and bells through to synth bass, effects and rhythmic sequences. Boss describes the tracking as latency-free, and chords work as well as single notes.
Tone/Rate and Depth adjust each sound, and the Effect and Direct knobs set synth and guitar levels separately. A send/return loop lets you run drives in parallel with the synth, or use the send as a direct out. Hold the switch to sustain the last synth sound and play guitar over it. A Guitar/Bass switch optimises the engine, and a footswitch or expression pedal adds tap tempo, octave shifts or Tone/Rate control. It draws 115 mA.
For 171 sounds, 128 memories and MIDI, look at the SY-200.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch; GUITAR/BASS switch; TYPE knob; VARIATION knob; TONE knob; DEPTH knob; EFFECT knob; DIRECT knob
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
EXP/CTL jack: Stereo 1/4-inch phone type
DC IN jack
SPECS
Nominal Input Level: INPUT, RETURN: -20 dBu
Input Impedance: INPUT, RETURN: 2.2 M ohms
Nominal Output Level: OUTPUT, SEND: -20 dBu
Output Impedance: OUTPUT, SEND: 1 k ohms
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Alkaline battery (9 V, 6LR61); AC adaptor (PSA series: sold separately)
Current Draw: 115 mA
Expected battery life under continuous use: Alkaline: Approx. 2 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 450 g / 1 lb



