The TU-3W Waza Craft takes the tuning features of the Boss TU-3 and adds a refined buffer circuit with the option of true bypass. The buffer drives the rest of your board with a strong, clear signal, and a rear-panel switch turns it off for wah, fuzz and other pedals that can be sensitive to buffering.
Tuning works as it does on the TU-3: a 21-segment LED meter accurate to plus or minus one cent, a High Brightness mode for outdoor stages, and the Accu-Pitch Sign when a string is in tune. Guitar and Bass modes tune by string number, covering 7-string guitars and 5- and 6-string basses, with flat tunings down six semitones for guitar and three for bass. The output mutes while you tune, a Bypass jack gives an unmuted second output, and a DC out jack can power other pedals from a PSA adaptor.
SPECIFICATIONS
CONTROLS
Display mode: Cent mode, Stream mode
Controls: Pedal switch, OUTPUT switch (BUF/THRU SW), MODE button, STREAM/CENT button
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, BYPASS jack: 1/4-inch phone type, DC IN jack, DC OUT jack
SPECS
Tuning Range: C0 (16.35 Hz)-C8 (4,186 Hz)
Reference Pitch: A4 = 436-445 Hz (1 Hz step)
Tuning Accuracy: +/- 1 cent
Modes: Chromatic, Chromatic flat x2, Guitar, Guitar flat x2, Bass, Bass flat x3
Bypass: Buffered bypass or True bypass
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
POWER
Power Supply: Alkaline battery (9V, 6F22) or Carbon-zinc battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 50 mA (DC 9 V), 110 mA (DC 9 V, when High Brightness mode is on)
Expected battery life under continuous use: Alkaline: Approx. 5.5 hours, Carbon: Approx. 0.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 460 g / 1 lb 1 oz



