The Buffer++ is a buffer, a router and an A/B/Y box in one enclosure. It has two inputs, a stereo effects loop and two outputs, and twelve internal routing modes that cover setups most switchers can't: two instruments into one amp, one guitar into two amps, a stereo board summed to mono for the gig, or a momentary jump from one loop to the other for an effect stab.
The signal path is analog, with the noise filtering of the Buffer+, a transformer-isolated second output to break ground loops between two amps, differential loop returns, input metering, pads and polarity switching. Input loading is on a knob, so you can add back cable-style warmth on purpose. There is also a footswitchable boost of up to 30dB and a tuner mute.
It suits the player running a stereo rig at home and mono on stage, or switching between electric and acoustic rigs through shared effects. If all you need is a clean I/O box, the Buffer or Buffer+ will do it in less space.
SPECIFICATIONS
SPECS
Routing Modes: 12
Input 1 Impedance: 10kΩ-1MΩ
Input 2 Impedance: 1MΩ
Frequency Response: 20Hz – 20kHz
Total Harmonic Distortion + Noise, Out 1: <0.1% (200Hz – 20kHz), <1% (20Hz – 20kHz)
Total Harmonic Distortion + Noise, Out 2 (isolation transformer): <0.1% (200Hz – 20kHz), <1% (55Hz – 20kHz)
Noise: < -110dBu
Boost: up to 30dB, footswitchable
Input Voltage: 9V DC Center-Negative
Required Current: 100mA
Power Input Connector: 2.1mm Barrel Connector
Height: 2"
Length: 4.5"
Width: 3.5"
Weight: 1lb
