The L210M is an 8-ohm 2x10 bass cabinet built tall and narrow, with two Lavoce 10-inch neodymium speakers stacked vertically over an HF horn. At 15.35 inches wide and 25.33 lb, it takes up very little floor, and the vertical layout lifts the speakers closer to ear level than a horizontal 2x10.
It's voiced after the L410, punchy through the mids and full in the low end, with 300 watts AES, 1200 watts peak and response from 49Hz to 20kHz. A three-way tweeter switch sets the top. It is built like the rest of the L Series from Italian poplar with a Baltic birch baffle, in sharkskin vinyl and vintage grille cloth, designed in the USA and built and assembled in the UK with Lavoce drivers.
Its width and depth match the L112M and the Bullhead Mini 500 Combo, so it stacks straight on top of either to put 10s over a 12. Stepping up, the L212 and L410 share a larger footprint with more power handling. The L210M is the small-stage answer, with a Bullhead Mini 500 or .5K on top.
SPECIFICATIONS
CABINET
Country of Origin: United Kingdom
Design: Designed in the USA, built and assembled in the UK
Impedance: 8 ohms
Power Handling: 300 watts AES, 600 watts program, 1200 watts peak
Freq. Resp.: 49Hz-20kHz
Construction: Italian Poplar with Baltic Birch baffle, Dado and Rabbet Joint Construction
Hardware: Metal handles, metal corners, rubber feet
Covering: 22 oz. sharkskin vinyl, vintage grille cloth
Size (H x W x D): 22.01 x 15.35 x 12.32 in / 55.9 x 39 x 31.3 cm
Weight: 25.33 lbs / 11.49 kg
SPEAKERS
Speaker: 2 x 10" Neodymium speaker built by Lavoce
Tweeter: HF driver with 80° conical horn
Tweeter Switch: three-way
Crossover: Custom, with peak protection and HF Attenuation
CONNECTIONS
Inputs: 2 x NL2 Combo connectors



