Opus is Two Notes' amp and cab simulator in a pedal-sized box. Plug a guitar straight in and it gives you a full amp: preamp models built on Two Notes' Tube-Stage Modeling, a power amp section where you pick the tube type (6L6, EL34, EL84 or KT88) and the class of operation, then DynIR cabinets with dual mic placement. It ships with 35 DynIR cabinets.
It also works the other way round. Switch the input to Amp and Opus sits after a real amp, taking up to 100 watts from the speaker output with the input pad engaged, while the amp keeps driving its own cab and Opus sends a miked-cab sound to the desk. Or turn its power amp model off and feed its preamp into a real amp's effects return. An XLR DI out, a balanced line out, a headphone out, MIDI control and USB-C for editing and recording cover the rest, and it stores up to 512 static IRs as well.
It suits a player building a direct rig for small stages and home recording, or one who wants the cab sound of a studio without hauling a cab. For a tube amp you want to keep running silent, the Captor X+ is the better fit: Opus is not a load box.
SPECIFICATIONS
INPUTS AND OUTPUTS
Amp/Inst/Line Input: 1/4" jack (TRS)
Input Impedance: Amp 160k Ohms unbalanced / 300k Ohms balanced; Line 37k Ohms unbalanced / 55k Ohms balanced; Inst. 1M Ohm unbalanced
Max Admissible Power for Amplifier Connection: 100W with input pad
Aux In: 1/8" (3.5mm) TRS jack
To Speaker Output: 1/4" jack, unprocessed, unbuffered
DI Output: XLR balanced, max level 10dBu, output impedance 600 Ohms, protected against +48V phantom power
Line Output: 1/4" (6.35mm) TRS jack, max level 10dBu, output impedance 600 Ohms
Headphone Output: 1/8" (3.5mm) TRS jack, 300mW under 100 Ohms
USB Connector: USB-C 2.0
MEMORY
DynIR Capacity: 64 DynIR
Memory Card: 256Mb Micro-SD included, up to 32Gb cards supported
DIGITAL AUDIO
AD/DA Converters: 24-bit / 96 kHz
Bandwidth (-1dB): 30 Hz to 19 kHz
Dynamic Range: 101dB
Internal Processing: 32-bit floating-point
Latency: 2.2 ms (Line Input to Line Output)
POWER
12V DC, 200mA, approx. 2W, 2.1mm x 5.5mm, center negative
Supplied adapter: 100-240V AC, 50-60Hz, 12V DC output, 2000 mA
DIMENSIONS
12.1cm x 10cm x 6cm (4.8" x 4" x 2.4") including connectors and knobs
Weight: 450 g / 0.99 lbs



