The BB-1X Bass Driver runs on Boss's MDP (Multi-Dimensional Processing), which reads the bass signal in real time, register, dynamics and playing style included, and processes each part on its own. Boss built it to act more like a preamp and DI than an occasional solo pedal: it covers clean to heavy distortion while holding on to the low end of the instrument and amp underneath.
Drive, Low and High set the gain and the voicing, and the Blend knob mixes your direct signal back in under the drive. The second output is a balanced 1/4" TRS Line Out that Boss tuned with input from bassists and PA engineers, so one pedal feeds your amp and sends a separate signal to the board or a recorder without a DI box.
It suits a bassist who wants one always-on pedal shaping the whole rig. Pair it with the BC-1X Bass Comp, Boss's multiband bass compressor, or add the GEB-7 if you want a full graphic EQ after it.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch, LEVEL knob, BLEND knob, LOW knob, HIGH knob, DRIVE knob
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
Connectors: INPUT jack, OUTPUT jack, LINE OUT jack (1/4-inch TRS phone type), AC adaptor jack (DC 9 V)
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: OUTPUT jack: -20 dBu / LINE OUT jack: -20 dBu
Output Impedance: OUTPUT jack: 1 k ohm / LINE OUT jack: 600 ohms
Recommended Load Impedance: OUTPUT jack: 10 k ohms or greater / LINE OUT jack: 600 ohms or greater
POWER
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 55 mA
Expected battery life under continuous use: Alkaline: Approx. 6 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-6/16 inches
Weight: 445 g / 1 lb



