The CEB-3 Bass Chorus is a compact chorus built for bass, with a crossover inside that splits your signal so the chorus works only on the higher frequencies. The low end passes through as it is, which keeps the fundamental clear and solid under the modulation.
Four knobs shape it: E.Level for how much chorus comes in, Low Filter for the low-frequency side of the split, and Rate and Depth for the speed and intensity of the movement. There are two outputs, A (mono) and B, and the pedal has buffered bypass and draws 55 mA.
SPECIFICATIONS
CONTROLS
Controls: DEPTH (Modulation depth) knob; RATE (Modulation rate) knob; LOW FILTER knob; E.LEVEL knob; Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT A (MONO) jack: 1/4-inch phone type
OUTPUT B jack: 1/4-inch phone type
DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Alkaline battery (9 V, 6LR61); AC adaptor (PSA series: sold separately)
Current Draw: 55 mA
Expected battery life under continuous use: Alkaline: Approx. 6 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 420 g / 15 oz



