The DM-2W Delay Waza Craft brings back the Boss DM-2 as a fully analog pedal with a BBD (bucket brigade) delay line. Standard mode reproduces the original DM-2, warm repeats and its 20 to 300 ms range. Custom mode moves to a cleaner analog repeat and stretches the time to 800 ms, more than double the original's reach.
Beside the two modes, the Waza version has a RATE jack so an expression pedal can sweep delay time from the floor, and a Direct Out that lets the delay and the dry signal leave on separate jacks for a two-amp setup. The controls are Repeat Rate, Intensity and Echo, plus the Mode switch. It draws 35 mA.
For analog-style repeats alongside eleven other delay types, with memories and stereo, look at the DD-200, whose Analog mode emulates the DM series.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch; REPEAT RATE knob; INTENSITY knob; ECHO knob; Mode switch
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
RATE jack: 1/4-inch TRS phone type
DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Delay Time: Standard Mode: 20 ms to 300 ms; Custom Mode: 40 ms to 800 ms
POWER
Power Supply: Alkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22); AC adaptor (PSA series: sold separately)
Current Draw: 35 mA
Expected battery life under continuous use: Alkaline: Approx. 15 hours; Carbon: Approx. 5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 460 g / 1 lb 1 oz



