The SDE-3000D puts two reproductions of the Roland SDE-3000, the rackmount digital delay released in 1983, into one floor pedal. Boss modelled the analog behaviour of the original along with its digital processing, which is where the SDE-3000's warm character came from.
The two delays are fully independent, each with its own modulation and panning, and run in series or parallel. Delay time has two ranges, 0 to 1500 ms and 0 to 3000 ms, and phase switches for the initial delay and the feedback loop change how the modulation reacts. Low-cut and high-cut filters shape the repeats, and 100 memories, up from the original's eight, switch with carryover.
Two inputs and two outputs cover dual mono, wet/dry and stereo rigs. Three footswitches handle memories, tap tempo and hold, two control jacks take up to four footswitches or two expression pedals, and MIDI runs on TRS jacks. The SDE-3000EVH is the same platform with eight locked presets taken from the delays in Eddie Van Halen's live rig. The SDE-3 is the compact version.
SPECIFICATIONS
CONTROLS
Controls: TIME button, FEEDBACK button, OUT button, RATE button, DEPTH button, 1-4 buttons, BANK A button, BANK B button, LEFT button, RIGHT button, FILTER button, TIME×2 button, DELAY PHASE button, MOD button, FEEDBACK PHASE button, DIGITAL DELAY1 button, DIGITAL DELAY2 button, SETUP button, DDL1 switch, DDL2 switch, TAP/CTL1 switch
Display: 7 segments, 12 digits LED
CONNECTIONS
Connectors: INPUT (L/MONO, R) jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type, CTL2,3/EXP1 jack, CTL4,5/EXP2/GA-FC jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, USB port: USB Type-C(R), DC IN jack
SPECS
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: SDE-3000 STEREO DELAY x2, FOOT VOLUME
Memories: 100
Nominal Input Level: INPUT (L/MONO, R): -10 dBu
Maximum Input Level: INPUT (L/MONO, R): +12 dBu
Input Impedance: INPUT (L/MONO, R): 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater
POWER
Power Supply: AC adaptor
Current Draw: 450 mA
DIMENSIONS
Width: 199 mm / 7-7/8 inches
Depth: 135 mm / 5-3/8 inches
Height (including rubber foot): 54 mm / 2-1/8 inches
Weight: 1.1 kg / 2 lb 7 oz



