The RE-202 recreates the Roland RE-201 Space Echo, the tape echo first released in 1974, from the tape and motor behaviour through to the spring reverb and preamp. Boss built it from analysis of several vintage units, and every core control of the original is here, the 12-position Mode Selector among them. Turn Repeat Rate and the pitch glides; max out Intensity and it runs away into feedback, as the RE-201 does.
Saturation adds tape compression and preamp colour, Wow & Flutter sets the amount of tape movement, and the Tape button picks new or aged tape. Past the original, there's twice the delay time, a fourth virtual head for more combinations, a stereo spring reverb with hall, plate, room and ambience types, Warp and Twist effects, and true stereo I/O with a choice of the modelled preamp or a clean dry signal. Four onboard memories, 127 by MIDI program change, tap tempo and carryover cover the modern side.
The RE-2 puts the Space Echo in a compact pedal with the original three-head layout and spring reverb.
SPECIFICATIONS
CONTROLS
Controls: ON/OFF switch; MEMORY switch; TAP switch; SATURATION knob; WOW & FLUTTER knob; MODE SELECTOR knob; BASS knob; TREBLE knob; REVERB VOL knob; REPEAT RATE knob; INTENSITY knob; ECHO VOL knob; MEMORY button; INPUT button; TAPE button
CONNECTIONS
INPUT A/MONO jack, INPUT B jack, OUTPUT A/MONO jack, OUTPUT B jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)
SPECS
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes
Memory: 127 + Manual
Nominal Input Level: INPUT A/MONO, INPUT B: -10 dBu
Maximum Input Level: INPUT A/MONO, INPUT B: +7 dBu
Input Impedance: INPUT A/MONO, INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A/MONO, OUTPUT B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, OUTPUT B: +7 dBu
Output Impedance: OUTPUT A/MONO, OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: AC adaptor
Current Draw: 140 mA
DIMENSIONS
Width: 192 mm / 7-9/16 inches
Depth: 133 mm / 5-15/64 inches
Height: 52 mm / 2-3/64 inches
Height (including rubber foot): 53 mm / 2-3/32 inches
Weight: 860 g / 1 lb 15 oz



