The GEB-7 is a seven-band graphic EQ voiced for bass, with bands at 50, 120, 400, 500, 800, 4.5k and 10k Hz. The bottom band reaches down to 50Hz, which covers five- and six-string basses through the full range and gives an upright with a pickup some control over its depth.
The Level control sets the output, so the pedal works as a cut or a boost as well as a tone shaper, and it suits electric-acoustic basses too. It runs on a 9V battery or a PSA adaptor and draws 30 mA. Put it after the BB-1X Bass Driver for finer EQ control than its Low and High knobs give, or run it on its own as the tone shaper on a bass board.
SPECIFICATIONS
CONTROLS
Controls: Level Control knob, Equalizer Control knob: 50, 120, 400, 500, 800, 4.5 k, 10 kHz, Pedal switch
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohm or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22), Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 30 mA
Expected battery life under continuous use: Carbon: Approx. 8.5 hours / Alkaline: Approx. 18.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 400 g / 15 oz



