The LMB-3 pairs a limiter with an enhancer circuit designed for electric bass. Threshold sets the level where limiting starts and Ratio sets how firmly it holds the peaks, which gives you control over the bass's whole dynamic range. The Enhance knob adds clarity and presence, and Level sets the output.
It runs on a 9-volt battery or an adaptor at 25 mA. For multiband compression that adjusts to register and dynamics as you play, with a gain reduction meter and an 18-volt input, look at the BC-1X Bass Comp.
SPECIFICATIONS
CONTROLS
Controls: THSHD knob; RATIO knob; ENHANCE knob; LEVEL knob; Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)
CONNECTIONS
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61); AC adaptor (PSA series: sold separately)
Current Draw: 25 mA
Expected battery life under continuous use: Carbon: Approx. 5 hours; Alkaline: Approx. 10.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 380 g / 14 oz



