The LS-2 Line Selector is a switching and routing pedal in the Boss compact format. It has two loops, A and B, each with its own send and return jacks and Level knob, and a Mode selector with six looping modes that set how the pedal switch moves between them. That covers switching between two effects chains, putting a group of pedals on one switch, or choosing between two amplifiers.
Run from a PSA adaptor, its DC IN/OUT jack can also feed several other Boss compact pedals through a PCS-20A cable, so on a smaller board it can serve as both the power point and the master switch. Buffered bypass, 30 mA draw.
SPECIFICATIONS
CONTROLS
Controls: MODE selector switch; LEVEL knobs A/B; Pedal switch
Indicator: Line indicator A/B (Used for indication of check battery)
CONNECTIONS
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohms
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61); AC adaptor (PSA series: sold separately)
Current Draw: 30 mA
Expected battery life under continuous use: Carbon: Approx. 14.5 hours; Alkaline: Approx. 29.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 430 g / 1 lb



