The NS-2 Noise Suppressor clears hum and buzz between notes while keeping your instrument's dynamics and decay intact. Boss built it around a VCA and fast envelope detection, so the suppression follows your notes smoothly as they fade.
Overdrives and distortions go in the send/return loop: the NS-2 reads your guitar at its input and suppresses the noise of the pedals in the loop, so it keeps working as you switch them on and off. Threshold sets where suppression starts and Decay sets how quickly the sound fades. The Mode switch picks Reduction, for switching suppression with the pedal, or Mute, which silences the signal for tuning and breaks. A 9V DC out jack can power other pedals when the NS-2 runs on a PSA adaptor.
The NS-1X adds MDP processing, a Gate mode for fast high-gain playing and a Damp control.
SPECIFICATIONS
CONTROLS
Controls: MODE selector switch, DECAY knob, THRESHOLD knob, Pedal switch
Indicator: CHECK/MUTE indicator (Used for indication of check battery), REDUCTION indicator
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, SEND jack: 1/4-inch phone type, RETURN jack: 1/4-inch phone type, DC IN jack, 9V DC OUT jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 25 mA
Expected battery life under continuous use: Carbon: Approx. 11 hours, Alkaline: Approx. 24.5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 415 g / 15 oz



