The OC-5 is Boss's octave pedal rebuilt around a tracking engine that Boss says responds accurately with no latency. Vintage mode recreates the mono OC-2 from 1982, with its own level knobs for one and two octaves down and for the direct signal. Poly mode, an evolution of the OC-3's, lets you play full chords, and its Range knob limits the effect to the lower notes, down to just the lowest note of a chord, so you can run an octave bass line under normal chords higher up the neck.
A +1 OCT knob adds an octave up in both modes, alone or blended with the octaves below, which gives the pedal a three-octave span. A switch on the side sets the tracking for guitar or bass, and a Direct Out jack sends the dry signal to a second amp or a separate mixer channel for wet/dry setups.
Guitarists and bassists both get the OC-2 sound and polyphonic tracking in one compact.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch, GUITAR/BASS switch, VINTAGE/POLY switch, DIRECT LEVEL knob, +1OCT knob, -1OCT knob, -2OCT/RANGE knob
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DIRECT OUT jack: 1/4-inch phone type, DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Alkaline battery (9 V, 6LR61 or 6LF22), AC adaptor (PSA series: sold separately)
Current Draw: 60 mA
Expected battery life under continuous use: Alkaline: Approx. 5 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb




