The RC-1 is the most direct looper in Boss's Loop Station range: record, playback, overdub and undo/redo, all from one multifunction footswitch, with a Level knob to set the loop against your live playing. It records up to 12 minutes in stereo, enough for a short groove or a long jam, and keeps your last loop in memory after you power down.
A circular multicolour LED ring shows where you are. It lights for record, playback and overdub, turns through the full loop or in faster steps for subdivisions, and confirms stop, erase and undo. The A and B inputs and outputs run mono or stereo, so it fits a single amp or a stereo rig, and a jack takes up to two optional Boss footswitches for direct stop and other functions. It runs on a 9V battery or a PSA adaptor and draws 95 mA.
Guitarists, bassists and keyboard players get looping on the board without menus. For loop memories, a display and built-in rhythms, look at the RC-5.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch, LEVEL knob
Indicators: CHECK indicator, LOOP indicator
CONNECTIONS
Connectors: INPUT A (MONO) jack: 1/4-inch phone type, INPUT B jack: 1/4-inch phone type, OUTPUT A (MONO) jack: 1/4-inch phone type, OUTPUT B jack: 1/4-inch phone type, STOP/UNDO jack: 1/4-inch TRS phone type, DC IN jack
SPECS
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Maximum Recording Time: Approximately 12 minutes
POWER
Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 95 mA
Expected battery life under continuous use: Alkaline: Approx. 3 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 430 g / 1 lb



