The RV-200 Reverb puts twelve reverb types in a 200 series pedal, running 32-bit AD/DA and 32-bit floating point processing at 96 kHz. Room, Hall, Plate and Spring cover the essentials, Modulate and +Delay add movement, Gate, Reverse and Lo-Fi handle the effect side, and Shimmer, Slowverb and Arpverb, a Boss-developed type with pitch-shifted arpeggio tails, go into ambient territory. The PARAM knob changes with each type, choosing the room size on Room or the number of springs on Spring.
Time, Pre-Delay, E. Level and variable Low and High filters sit on the panel, with a six-stage Density control. It stores 127 memories, keeps trails with selectable carryover, and runs stereo with wet/dry and dry mute options. The two footswitches can take on Hold, Warp, Twist and Fade, and external footswitches, an expression pedal or TRS MIDI take it further.
For two reverbs at once and a larger set of algorithms, look at the RV-500.
SPECIFICATIONS
CONTROLS
Controls: ON/OFF switch; MEMORY/HOLD switch; MODE knob; TIME knob; PRE-DELAY knob; E. LEVEL knob; PARAM knob; LOW knob; HIGH knob; DENSITY button; MEMORY button
Display: 7 segments; 3 characters (LED)
Indicator: DENSITY indicator; MEMORY (MAN, 1-4) indicators
CONNECTIONS
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB2.0 micro B (program update only)
SPECS
Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes; ROOM; HALL; PLATE; SPRING; SHIMMER; ARPVERB; SLOWVERB; MODULATE; +DELAY; LO-FI; GATE; REVERSE
Memory: 127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
POWER
Power Supply: Alkaline battery (AA, LR6) x 3; AC adaptor (sold separately)
Current Draw: 260 mA
Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
DIMENSIONS
Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz



