The RV-6 is Boss's compact reverb with eight modes on algorithms Boss developed for it: Room, Hall, Plate and Spring for the standards, Modulate for a moving hall, and three for more modern textures. Shimmer adds a bright overtone layer, +Delay combines reverb with delay, and Dynamic sets the depth by how hard you play so the reverb stays out of the way of busy passages.
Time, Tone and E.Level are the only knobs, but each mode adjusts several internal parameters as you turn them, voiced by Boss with input from players and engineers. The dry signal stays analog. The jacks auto-switch for mono, mono-to-stereo or stereo operation, plugging into input B alone gives a 100% wet output for parallel rigs, and an EXP jack lets an expression pedal ride the reverb level.
It's a full reverb section in one compact for most boards. For 12 modes, memories and MIDI, look at the RV-200; the RV-500 goes further again.
SPECIFICATIONS
CONTROLS
Controls: Pedal switch, E.LEVEL knob, TONE knob, TIME knob, MODE knob
Indicator: CHECK indicator (Serves also as battery check indicator)
CONNECTIONS
Connectors: INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, EXP jack, AC adaptor jack (DC 9 V)
SPECS
Reverb Modes: 8 modes: HALL, PLATE, ROOM, SPRING, MODULATE, +DELAY, SHIMMER, DYNAMIC
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
POWER
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 95 mA
Expected battery life under continuous use: Alkaline: Approx. 3 hours
DIMENSIONS
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 450 g / 1 lb



