The ASM-12 is Friedman's 12-inch active monitor for modeler and profiler rigs: a Celestion 12″ speaker with a 2.5″ edge wound voice coil and a Celestion PETP film compression driver with a 1.75″ voice coil, powered by a bi-amped Class G amp rated at 500 watts maximum burst. Friedman voiced it for units such as the Fractal Audio Axe-Fx, Kemper Profiler and Line 6 HD Series.
It works on the floor as a tilt-back wedge, or on a 1 1/2″ speaker stand through its pole mounting cup, and Friedman pitches it for backline, stage monitoring or as a main PA speaker. A link output feeds more speakers, and the controls are a level knob, a low-cut filter switch and a ground lift. The cabinet is hand crafted in the USA from Baltic birch, with a detachable black grille.
Against the ASM-10 it has the bigger speaker and driver and 75° conical dispersion, at 56 lbs. The ASC-12 is the same 12-inch package styled as a traditional backline cab.
SPECIFICATIONS
AMPLIFIER
Country of Origin: United States
Configuration: 12″ 2-Way Active Stage Monitor for use with modelers/profilers
Assembly: Made in USA using premium worldwide components
Power Output: LF: 270Wrms Class G / HF: 80Wrms Class AB+B
Maximum Total Burst Power: 500W
Electronic Crossover: 4th order
Cooling: Convection
Amplifier Protection: Short circuit, Clip-limiter, Overheat mute, SOA output stage, Driver DC protection, Subsonic filter, Turn-on mute and soft ramp, Turn-on inrush current limiting
SPEAKERS
Low Frequency Transducer: Celestion 12″ speaker with 2.5″ edge wound voice coil
High Frequency Transducer: Celestion PETP film compression driver with 1.75″ voice coil
High Frequency Dispersion: 75° conical
Frequency Range: 50Hz - 20kHz
Frequency Response: 58Hz - 18kHz
Maximum Peak SPL: 129dB
CONTROLS
Controls: Level knob, Low-cut filter switch, Ground lift switch
Low Cut Filter (switchable): 3rd order Butterworth @ 100Hz
Indicators: Power, Protect, Limit, Signal
CONNECTIONS
Connectors: Balanced female XLR input / Balanced male XLR link output
Input Impedance: 20k Ohm Balanced / 10k Ohm Unbalanced
Input Sensitivity: 775mV (0dBu)
POWER
Power switch, AC fuse, 115/230V switch
Power Consumption: 1.7A/0.85A 115Vac/230Vac
Power Consumption (1/8 power pink noise): 150VA
CABINET
Design: Tilt-back floor monitor
Enclosure: Black Warnex® painted, Baltic birch plywood construction
Hardware: Strap handle, Rubber feet / Rubber Strips, Pole mounting cup, Detachable black grille
DIMENSIONS
Dimensions: 673mm x 419mm x 406mm
Weight: 56 lbs.



