The Bullhead 1.5K is a 1500-watt class D bass head that takes the front end of the Bullhead 3K, its Mike Pope-designed preamp, switchable 4-band EQ and variable filters, and runs it into a single Pascal L-Pro2S power module. One input, one power amp, two rack spaces and 7.2 lb.
Every EQ band has two frequency choices and 12dB of cut or boost: Bass shelves from 40Hz or 80Hz, Low Mid centres on 330Hz or 473Hz, Hi Mid on 1kHz or 1.8kHz, and Treble shelves from 4kHz or 8kHz. The High Pass and Low Pass filters cut at 24dB per octave and switch in independently, the High Pass sweeping up from 38Hz to 310Hz and the Low Pass down from 15kHz to 330Hz. They set the outer edges of the sound, taming stage boom or a bright top end, while the EQ you've set inside them stays where it is.
The 3K adds a second power module and a second input for running two rigs at once. The 1K below it is 1000 watts without the filter section. For cabinets, the L410 and L212 are the L Series boxes with the most power handling, at 600 and 800 watts AES.
SPECIFICATIONS
SPECS
Power Output: 1500W
Power Amplifier: Class D, Pascal L-Pro2S power module
Power Output, 4 Ohms: 2500W Peak, 1700W RMS @ 1% THD
Power Output, 8 Ohms: 1500W Peak, 1060W RMS @ 1% THD
AC Mains: Universal, 100V to 240V
Rack Spaces: 2
Size (H x W x D): 3.25 x 15 x 8.6 in / 8.26 x 38.1 x 21.84 cm
Weight: 7.2 lbs / 3.26 kg
PREAMP
Preamp: Mike Pope-designed Bullhead preamp
Input Attenuator: 0dB or -10dB, for active or passive instruments
EQ
EQ: 4-band switchable, ±12dB per band
Bass Cut/Boost with Frequency Select: shelving, 40Hz or 80Hz
Low Mid Cut/Boost with Frequency Select: bell, 330Hz or 473Hz
Hi Mid Cut/Boost with Frequency Select: bell, 1kHz or 1.8kHz
Treble Cut/Boost with Frequency Select: shelving, 4kHz or 8kHz
FILTERS
High Pass Filter: defeatable, variable, 24dB/octave, 38Hz to 310Hz
Low Pass Filter: defeatable, variable, 24dB/octave, 330Hz to 15kHz
CONTROLS
Master Volume
Amplifier Mute
CONNECTIONS
Input: 1/4" mono instrument input
Speaker Output Main: Speakon combo (Speakon or 1/4")
Main Direct Out: balanced XLR, pre/post EQ selector, ground lift
EFX Loop: Send and Return, series/parallel switch, dedicated ground lift
Aux Input: line in, with headphone connection for silent practice
Tuner Output: 1/4"
AC Mains Input: IEC



