The Bullhead Mini 500 is a 500-watt class D bass head that weighs 3.5 lb and measures 10.55 inches wide, with the Mike Pope-designed low-noise preamp at its front end. It is the smallest and lightest head in the Bullhead line.
Its 4-band EQ runs at fixed frequencies: shelving Bass at 80Hz and Treble at 8kHz, band pass Low Mid at 333Hz and Hi Mid at 1.8kHz. With the frequencies set, you go straight to cut or boost. There's switchable input attenuation for active or passive basses, signal and clip LEDs, an effects loop, a 600-ohm balanced XLR direct out with pre/post and ground lift, a 1/8" line input, a 1/8" headphone out and a push-button mute. Power is 500 watts into 4 ohms and 250 watts into 8.
The Mini 500 Combo puts this same amp over a 12-inch Lavoce speaker and tweeter, for a player who wants the whole rig in one box. The head suits a player who already has a cabinet, or who wants to build one around it: the L112M shares the combo's footprint, and the L210M is sized to stack on top. The Bullhead .5K is the step up, with 700 watts and selectable EQ frequencies.
SPECIFICATIONS
SPECS
Country of Origin: United States
Power Output, 4 Ohms: 500W @ 1% THD
Power Output, 8 Ohms: 250W @ 1% THD
Power Amplifier: Class D
Power Supply: Switch-Mode Power Supply
AC Mains: 85-132V, 195-264V, 45-65 Hz, 1000VA (worldwide usage)
Chassis: Aircraft grade aluminum w/removable rubber feet
Size (H x W x D): 2.77 x 10.55 x 7.87 in / 7.05 x 26.8 x 20 cm
Weight: 3.5 lbs
Warranty: 5 year limited
PREAMP
Pre-Amp: Low noise, all analog, solid state, Mike Pope-designed
Input: 1/4" phone with switchable attenuation and rotary gain control
Input Attenuator: +/- 10dB, for active or passive inputs
Input Level Indicator: Signal level and Clip LEDs (green/red)
EQ
EQ: 4 Band, fixed frequency
Bass: 80Hz, shelving
Low Mid: 333Hz, variable gain band pass
Hi Mid: 1.8kHz, variable gain band pass
Treble: 8kHz, shelving
CONTROLS
Input Gain
Bass, Low Mid, Hi Mid and Treble Cut/Boost
Master Volume: Rotary Control
Mute Switch: push button
AC Mains Power Switch with LED Indicator
CONNECTIONS
Instrument Input: 1/4" phone
Line In: 1/8" mini jack
Headphone Out: Stereo 1/8" mini jack
Speaker Output: Neutrik Combo Connector, accepts speakON or 1/4" phone
EFX Loop: Send and Return
Direct Out: 600 Ohm Balanced, XLR, Pre/Post, Ground Lift



