The VCA Compressor is a voltage-controlled amplifier compressor for bass, designed to sit between transparent studio compression and the added colour of vintage compressors. It runs on four controls: Threshold sets where compression starts, Ratio sets how hard it pulls the level down, Level sets the output, and Blend mixes in your dry signal.
The Blend knob gives you parallel compression in a single pedal: compress the signal hard and bring the uncompressed attack back underneath, or keep the blend fully wet for a plain, even level. With four knobs it's quick to set.
It is one of four compact Trickfish pedals that each do a single job, alongside the Signal Filter, the External Preamp and the Overdrive Preamp, all in the same steel housing on 9V.
SPECIFICATIONS
SPECS
Compression: VCA (voltage-controlled amplifier)
Input/Output Impedance: 1M Ohm / 100k Ohm
Power Requirements: 9V DC (center pin negative)
Power Consumption: 186 mA
Chassis: Steel, removable adhesive-backed rubber feet
Size including knobs (H x W x L): 2.29 (top) 1.96 (bottom) x 2.72 x 5.08 in / 58.2 (top) 49.9 (bottom) x 69 x 129.7 mm
Weight: 0.98 lbs / 0.45 kg
CONTROLS
THRESHOLD: sets the level at which the compressor engages
RATIO: sets how aggressively the gain is reduced
LEVEL: overall output level
BLEND: sweeps between wet/dry levels
ON: footswitch, toggles effect on/bypass
CONNECTIONS
IN: 1/4" phone jack input
OUT: 1/4" phone jack output
DC IN: 9V DC, center pin negative



