The External Preamp is Trickfish's IPA onboard bass preamp in a pedal, a 3-band EQ that gives a passive bass active tone shaping without opening it up. It works with active basses too, and sits as well at the start of a pedalboard as after the effects as a final tone stage.
Bass shelves at 40Hz or 80Hz with 12dB of cut or boost, Mid works between 330Hz and 500Hz with 12dB, and Treble works at 4kHz or 8kHz with 15dB. The frequency points are set with dip switches inside the pedal, so once it's voiced to your bass, the three knobs on top do the work.
It is one of four compact Trickfish pedals built for a single job, alongside the Signal Filter, the Overdrive Preamp and the VCA Compressor. For the full Bullhead 4-band EQ with a DI, look at the Minnow.
SPECIFICATIONS
SPECS
EQ: 3 Band
BASS: shelving boost/cut 12dB @ 40/80Hz
MID: boost/cut 12dB, 330Hz to 500Hz (frequency set by internal dip switch)
TREBLE: boost/cut 15dB @ 4k/8kHz
Frequency Select: dip switches on the circuit board
Input/Output Impedance: 1M Ohm / 100k Ohm
Power Requirements: 9V DC (center pin negative)
Power Consumption: 2.6 mA
Chassis: Steel, removable adhesive-backed rubber feet
Size including knobs (H x W x L): 2.29 (top) 1.96 (bottom) x 2.72 x 5.08 in / 58.2 (top) 49.9 (bottom) x 69 x 129.7 mm
Weight: 0.98 lbs / 0.45 kg
CONTROLS
BASS
MID
TREBLE
ON: footswitch, toggles effect on/bypass
CONNECTIONS
IN: 1/4" phone jack input
OUT: 1/4" phone jack output
DC IN: 9V DC, center pin negative



