An early '60s Stratocaster in Relic aging, with a 2-piece select alder body with an offset seam, a 3-ply mint green pickguard and a maple neck carved to a '60s Oval "C" under a 3A Rosewood board. The 7.25" to 9.5" compound radius feels round and vintage near the nut and flattens out higher up, so bends are less likely to choke.
The pickups are Custom Shop Hand-Wound Fat '60s Single-Coil Strat, middle reverse-wound and reverse-polarity, on Vintage Modified #2 wiring with a Greasebucket tone control and a treble-bleed on the master volume. The wiring blends in the neck pickup in positions 1 and 2, which a stock Strat can't do, and Tone 2 gives the bridge its own tone control.
The 1960 Stratocaster Journeyman Relic is close in spirit with a straight 9.5" radius and '60s pickups. For heavier wear look at the 1963 Stratocaster Super Heavy Relic, and for the same year with no aging, the Vintage Custom 1962 Stratocaster.
Three finishes: Aged Olympic White, Aged Lake Placid Blue and Aged Seminole Red.
The photos show one example. Wood grain and aging vary from guitar to guitar, so the one built for you will differ in the details.
SPECIFICATIONS
BODY
Country of Origin: USA
Body Material: 2-Piece Select Alder with Offset Seam
Body Finish: Nitrocellulose Lacquer
Body Shape: Stratocaster
Pickguard: 3-Ply Mint Green
Aging: Relic
NECK
Neck Material: Maple
Neck Finish: Nitrocellulose Lacquer
Neck Shape: '60s Oval "C"
Fingerboard Radius: 7.25" to 9.5" Vintage Compound Radius (184 mm to 241 mm)
Fingerboard Material: 3A Rosewood
Position Inlays: Vintage Clay Dot
Number of Frets: 21
Fret Size: Jescar Vintage (45085)
Truss Rod: Early '60s
Nut Material: Bone
Nut Width: 1.650" (42 mm)
Scale Length: 25.5" (648 mm)
ELECTRONICS
Bridge Pickup: Custom Shop Hand-Wound Fat '60s Single-Coil Strat
Middle Pickup: Custom Shop Hand-Wound RWRP Fat '60s Single-Coil Strat
Neck Pickup: Custom Shop Hand-Wound Fat '60s Single-Coil Strat
Pickup Configuration: SSS
Controls: Master Volume with Tone-Saver Treble-Bleed Circuit, Tone 1. (Neck/Middle Pickups), Tone 2. (Bridge Pickup)
Switching: 5-Position Blade: Position 1. Bridge with Neck Blend, Position 2. Bridge and Middle with Neck Blend, Position 3. Middle, Position 4. Neck and Middle, Position 5. Neck
HARDWARE
Bridge: Custom Shop Vintage Synchronized Tremolo
Hardware Finish: Nickel/Chrome
Tuning Machines: Vintage-Style with Fender Logo
Tremolo Arm: Vintage Upgraded '60s
Control Knobs: Vintage White Plastic
Strings: Nickel Plated Steel (.010-.046 Gauges)
CASE
Case: Deluxe Hardshell